| Merknaam: | PM |
|---|---|
| Min. bestelaantal: | 10 |
| Levertijd: | 1-25 het werkdagen |
| Betalingscondities: | T/T |
| Levering vermogen: | 1000000pcs/month |
| Diameter: | 620mm | Lengte: | 330mm |
|---|---|---|---|
| Co%: | 9% | HRA: | 91.2 |
| Hardheid HV30: | 1520 | Dichtheid: | 14.4 |
| Materiaal: | Wolframcarbide | ||
| Hoog licht: | De Boorspaties van het Ungrindcarbide,De Boorstaaf van het Ungrindcarbide,Gesinterde de Spatiesheup van de carbideboor |
||
Vaste de Lengtestaven van het wolframcarbide hexil 30° ungrind voor Boringshulpmiddelen
Onze staven hebben verschillende kwaliteit en recht op gebruik op verschillende toepassing; Speciaal zijn wij opbrengst het Nano Korrelcarbide (Grain<0.2µm); Onze staven zijn met hoge hardheid en slijtage/corrosieweerstand, alle producten met stabiele kwaliteit;
l Dimensie: diameter van 620mm, lengte 330mm;
l met 30° de staven van schroefgaten;
Ranginformatie
| Rang | Co% | Korrelgrootte van WC | Hardheid |
Hardheid |
Dichtheid | Flexural Sterkte | Breuk Hardheid |
Elastische Mod.-ulus | Coëfficiënt van Thermisch Uitbreiding |
| HRA | HV30 | g/cm ³ | MPa | GPa | MNm-3/2 | 0-6/℃ | |||
| ST15D | 9 | Submicron | 91.2 | 1520 | 14.4 | 3500 | 13 | 500 | 5.3 |
| D (mm) | Tolerantie | L (mm) | Tolerantie | TK (mm) | Tolerantie | D (mm) | Tolerantie | P (±0.5o) |
amax (mm) |
| 6.3 | +0.9/+1.3 | 63 | +0.5/+1.0 | 2.60 | +0/0.40 | 0,70 | ±0.10 | 32.65 0.65/+0.67 | 0,15 |
| 6.3 | +0.9/+1.3 | 67 | +0.5/+1.0 | 2.60 | +0/0.40 | 0,70 | ±0.10 | 32.65 0.65/+0.67 | 0,15 |
| 6.3 | +0.9/+1.3 | 75 | +0.5/+1.0 | 2.60 | +0/0.40 | 0,70 | ±0.10 | 32.65 0.65/+0.67 | 0,15 |
| 6.3 | +0.9/+1.3 | 83 | +0.5/+1.0 | 2.60 | +0/0.40 | 0,70 | ±0.10 | 32.65 0.65/+0.67 | 0,15 |
| 8.3 | +0.9/+1.3 | 80 | +0.5/+1.0 | 4.00 | +0/0.40 | 1.00 | ±0.15 | 43.53 0.86/+0.89 | 0,15 |
| 8.3 | +0.9/+1.3 | 92 | +0.5/+1.0 | 4.00 | +0/0.40 | 1.00 | ±0.15 | 43.53 0.86/+0.89 | 0,15 |
| 10.3 | +0.9/+1.3 | 90 | +0.5/+1.0 | 4.80 | +0/0.60 | 1.40 | ±0.15 | 54.41 1.08/+1.11 | 0,20 |
| 10.3 | +0.9/+1.3 | 103 | +0.5/+1.0 | 4.80 | +0/0.60 | 1.40 | ±0.15 | 54.41 1.08/+1.11 | 0,20 |
| 12.3 | +1.1/+1.5 | 103 | +0.5/+1.0 | 6.25 | +0/0.80 | 1.40 | ±0.15 | 65.30 1.30/+1.34 | 0,30 |
| 12.3 | +1.1/+1.5 | 119 | +0.5/+1.0 | 6.25 | +0/0.80 | 1.40 | ±0.15 | 65.30 1.30/+1.34 | 0,30 |
| 14.3 | +1.1/+1.5 | 108 | +0.5/+1.0 | 7.10 | +0/0.80 | 1.75 | ±0.20 | 76.18 1.51/+1.56 | 0,37 |
| 14.3 | +1.1/+1.5 | 125 | +0.5/+1.0 | 7.10 | +0/0.80 | 1.75 | ±0.20 | 76.18 1.51/+1.56 | 0,37 |
| 16.3 | +1.1/+1.5 | 116 | +0.5/+1.0 | 8.30 | +0/0.80 | 1.75 | ±0.20 | 87.06 1.73/+1.78 | 0,40 |
| 16.3 | +1.1/+1.5 | 134 | +0.5/+1.0 | 8.30 | +0/0.80 | 1.75 | ±0.20 | 87.06 1.73/+1.78 | 0,40 |
| 18.3 | +1.1/+1.5 | 124 | +0.5/+1.0 | 9.55 | +0/0.80 | 2.00 | ±0.25 | 97.95 1.94/+2.00 | 0,50 |
| 18.3 | +1.1/+1.5 | 144 | +0.5/+1.0 | 9.55 | +0/0.80 | 2.00 | ±0.25 | 97.95 1.94/+2.00 | 0,50 |
| 20.3 | +1.1/+1.5 | 132 | +0.5/+1.0 | 10.40 | +0/1.00 | 2.00 | ±0.25 | 108.83 2.16/+2.23 | 0,50 |
| 20.3 | +1.1/+1.5 | 154 | +0.5/+1.0 | 10.40 | +0/1.00 | 2.00 | ±0.25 | 108.83 2.16/+2.23 | 0,50 |