Diameter: | 242mm | Lengte: | 310/330mm |
---|---|---|---|
Co%: | 12% | HRA: | 92.4 |
Hardheid HV30: | 1740 | Dichtheid: | 14.1 |
Materiaal: | Wolfram Gecementeerd Carbide | ||
Hoog licht: | De gecementeerde Ronde Bar van de Carbidelegering,De Ronde Bar van de wolframlegering,De Bar HV1740 van de wolframlegering |
De wolfram Gecementeerde Hardheid HV1740 van Carbidestaven
Onze staven hebben verschillende kwaliteit en recht op gebruik op verschillende toepassing; Speciaal zijn wij opbrengst het Nano Korrelcarbide (Grain<0.2µm); Onze staven zijn met hoge hardheid en slijtage/corrosieweerstand, alle producten met stabiele kwaliteit;
l Dimensie: diameter van 242mm, lengte 310/330mm;
l Gebruik voor Afwerkingsmalen
l Malen met h6/h5-tolerantie
Ranginformatie
Rang | Co% | Korrelgrootte van WC | Hardheid |
Hardheid |
Dichtheid | Flexural Sterkte | Breuk Hardheid |
Elastische Mod.-ulus | Coëfficiënt van Thermisch Uitbreiding |
HRA | HV30 | g/cm ³ | MPa | GPa | MNm-3/2 | 0-6/℃ | |||
ST25F | 9 | Ultra-fine | 92.4 | 1740 | 14.1 | 5100 | 10 | 470 | 5.7 |
Diameter | Lengte | ||||||||
D (mm) | Tolerantie | L (mm) | Tolerantie | ||||||
3.0 | +0.2~+0.4 | 40 | +0.5~+1.0 | ||||||
3.0 | +0.2~+0.4 | 50 | +0.5~+1.0 | ||||||
3.0 | +0.2~+0.4 | 75 | +0.5~+1.0 | ||||||
3.0 | +0.2~+0.4 | 100 | +0.5~+1.0 | ||||||
4.0 | +0.2~+0.4 | 50 | +0.5~+1.0 | ||||||
4.0 | +0.2~+0.4 | 60 | +0.5~+1.0 | ||||||
4.0 | +0.2~+0.4 | 75 | +0.5~+1.0 | ||||||
4.0 | +0.2~+0.4 | 100 | +0.5~+1.0 | ||||||
5.0 | +0.2~+0.4 | 50 | +0.5~+1.0 | ||||||
5.0 | +0.2~+0.4 | 60 | +0.5~+1.0 | ||||||
5.0 | +0.2~+0.4 | 75 | +0.5~+1.0 | ||||||
5.0 | +0.2~+0.4 | 100 | +0.5~+1.0 | ||||||
6.0 | +0.2~+0.4 | 50 | +0.5~+1.0 | ||||||
6.0 | +0.2~+0.4 | 60 | +0.5~+1.0 | ||||||
6.0 | +0.2~+0.4 | 75 | +0.5~+1.0 | ||||||
6.0 | +0.2~+0.4 | 80 | +0.5~+1.0 | ||||||
6.0 | +0.2~+0.4 | 100 | +0.5~+1.0 | ||||||
6.0 | +0.2~+0.4 | 150 | +0.5~+1.0 | ||||||
8.0 | +0.3~+0.55 | 60 | +0.5~+1.0 | ||||||
8.0 | +0.3~+0.55 | 75 | +0.5~+1.0 | ||||||
8.0 | +0.3~+0.55 | 80 | +0.5~+1.0 | ||||||
8.0 | +0.3~+0.55 | 100 | +0.5~+1.0 | ||||||
8.0 | +0.3~+0.55 | 150 | +0.5~+1.0 | ||||||
10.0 | +0.3~+0.55 | 75 | +0.5~+1.0 | ||||||
10.0 | +0.3~+0.55 | 100 | +0.5~+1.0 | ||||||
10.0 | +0.3~+0.55 | 150 | +0.5~+1.0 | ||||||
12.0 | +0.3~+0.55 | 75 | +0.5~+1.0 | ||||||
12.0 | +0.3~+0.55 | 100 | +0.5~+1.0 | ||||||
12.0 | +0.3~+0.55 | 150 | +0.5~+1.0 | ||||||
14.0 | +0.3~+0.65 | 100 | +0.5~+1.0 | ||||||
14.0 | +0.3~+0.65 | 150 | +0.5~+1.0 | ||||||
16.0 | +0.3~+0.65 | 92 | +0.5~+1.0 | ||||||
16.0 | +0.3~+0.65 | 100 | +0.5~+1.0 | ||||||
16.0 | +0.3~+0.65 | 150 | +0.5~+1.0 | ||||||
18.0 | +0.4~+0.8 | 100 | +0.5~+1.0 | ||||||
18.0 | +0.4~+0.8 | 150 | +0.5~+1.0 | ||||||
20.0 | +0.4~+0.8 | 100 | +0.5~+1.0 | ||||||
20.0 | +0.4~+0.8 | 150 | +0.5~+1.0 |