Diameter: | 620mm | Lengte: | 330mm |
---|---|---|---|
Co%: | 9% | HRV: | 91.2 |
Hardheid HV30: | 1520 | Dichtheid: | 14.4 |
Materiaal: | Wolframcarbide | ||
Hoog licht: | Wolframcarbide Rod High Hardness,Wolframcarbide Rod Ungrind,de Staaf van het Schroefcarbide |
De Stavenlengte 330mm van het wolframcarbide hexil 40° ungrind voor Boringshulpmiddelen
Onze staven hebben verschillende kwaliteit en recht op gebruik op verschillende toepassing; Speciaal zijn wij opbrengst het Nano Korrelcarbide (Grain<0.2µm); Onze staven zijn met hoge hardheid en slijtage/corrosieweerstand, alle producten met stabiele kwaliteit;
l Dimensie: diameter van 620mm, lengte 330mm;
l met 30° de staven van schroefgaten;
Ranginformatie
Rang | Co% | Korrelgrootte van WC | Hardheid |
Hardheid |
Dichtheid | Flexural Sterkte | Breuk Hardheid |
Elastische Mod.-ulus | Coëfficiënt van Thermisch Uitbreiding |
HRA | HV30 | g/cm ³ | MPa | GPa | MNm-3/2 | 0-6/℃ | |||
ST15D | 9 | Submicron | 91.2 | 1520 | 14.4 | 3500 | 13 | 500 | 5.3 |
Diameter | Lengte | Gat het Uit elkaar plaatsen | Gatengrootte | |||||||||||||||
D (mm) | 公差 | L (mm) | Tolance | TK (mm) | Tolance | D (mm) | Tolance | „P (±0.5°)“ |
amax (mm) | |||||||||
6.3 | +0.9/+1.3 | 330 | +0/+5 | 1.40 | +0/0.40 | 0,40 | ±0.15 | 22.46 0.39/+0.40 | 0,15 | |||||||||
6.3 | +0.9/+1.3 | 330 | +0/+5 | 2.20 | +0/0.40 | 0,50 | ±0.15 | 22.46 0.39/+0.40 | 0,15 | |||||||||
7.3 | +0.9/+1.3 | 330 | +0/+5 | 2.40 | +0/0.40 | 0,70 | ±0.15 | 26.21 0.46/+0.47 | 0,15 | |||||||||
8.3 | +0.9/+1.3 | 330 | +0/+5 | 1.70 | +0/0.20 | 0,40 | ±0.10 | 29.95 0.53/+0.54 | 0,15 | |||||||||
8.3 | +0.9/+1.3 | 330 | +0/+5 | 2.70 | +0/0.60 | 0,65 | ±0.15 | 29.95 0.53/+0.54 | 0,15 | |||||||||
9.3 | +0.9/+1.3 | 330 | +0/+5 | 3.20 | +0/0.60 | 0,75 | ±0.15 | 33.70 0.59/+0.60 | 0,20 | |||||||||
10.3 | +0.9/+1.3 | 330 | +0/+5 | 2.10 | +0/0.20 | 0,50 | ±0.10 | 37.44 0.66/+0.67 | 0,20 | |||||||||
10.3 | +0.9/+1.3 | 330 | +0/+5 | 3.50 | +0/0.80 | 0,80 | ±0.15 | 37.44 0.66/+0.67 | 0,20 | |||||||||
11.3 | +0.9/+1.3 | 330 | +0/+5 | 3.70 | +0/0.80 | 0,80 | ±0.15 | 41.18 0.72/+0.74 | 0,28 | |||||||||
12.3 | +1.1/+1.5 | 330 | +0/+5 | 2.50 | +0/0.40 | 0,60 | ±0.10 | 44.93 0.79/+0.80 | 0,30 | |||||||||
12.3 | +1.1/+1.5 | 330 | +0/+5 | 4.20 | +0/0.80 | 0,90 | ±0.20 | 44.93 0.79/+0.80 | 0,30 | |||||||||
13.3 | +1.1/+1.5 | 330 | +0/+5 | 4.40 | +0/0.80 | 0,90 | ±0.15 | 48.67 0.85/+0.87 | 0,34 | |||||||||
14.3 | +1.1/+1.5 | 330 | +0/+5 | 2.90 | +0/0.40 | 0,70 | ±0.10 | 52.42 0.92/+0.94 | 0,37 | |||||||||
14.3 | +1.1/+1.5 | 330 | +0/+5 | 4.70 | +0/0.80 | 1.00 | ±0.20 | 52.42 0.92/+0.94 | 0,37 | |||||||||
15.3 | +1.1/+1.5 | 330 | +0/+5 | 5.10 | +0/0.80 | 1.10 | ±0.20 | 56.16 0.99/+1.01 | 0,40 | |||||||||
16.3 | +1.1/+1.5 | 330 | +0/+5 | 3.30 | +0/0.40 | 0,80 | ±0.10 | 59.90 1.05/+1.07 | 0,40 | |||||||||
16.3 | +1.1/+1.5 | 330 | +0/+5 | 5.50 | +0/0.80 | 1.20 | ±0.20 | 59.90 1.05/+1.07 | 0,40 | |||||||||
18.3 | +1.1/+1.5 | 330 | +0/+5 | 3.70 | +0/0.40 | 0,90 | ±0.15 | 67.39 1.18/+1.21 | 0,50 | |||||||||
18.3 | +1.1/+1.5 | 330 | +0/+5 | 6.30 | +0/0.80 | 1.40 | ±0.25 | 67.39 1.18/+1.21 | 0,50 | |||||||||
20.3 | +1.1/+1.5 | 330 | +0/+5 | 4.10 | +0/0.40 | 1.00 | ±0.15 | 74.88 1.31/+1.34 | 0,50 | |||||||||
20.3 | +1.1/+1.5 | 330 | +0/+5 | 7.10 | +0/1.00 | 1.50 | ±0.25 | 74.88 1.31/+1.34 | 0,50 |